Updated: June 14, 2018
If your air conditioner was installed before 2010 and you don’t know what R22 is then you should probably find out more. R22 refrigerant is a chemical that keeps the air coming from your air conditioning system cool, so it’s certainly incredibly vital. Most air conditioning units older than 10 years use an AC refrigerant called R22 that’s commonly identified as Freon*, and is referred to by the EPA as HCFC-22. In this article, we’ll use the name R22. This refrigerant was introduced in the 1950s and became the main AC refrigerant in the residential heating and cooling industry.
The Montreal Protocol
Several decades later the world realized that R22 refrigerant was aiding in the depletion of the Earth’s ozone layer. Not cool. So, the U.S. EPA, in cooperation with other agencies and groups around the world, started a phase out of lots of ozone-depleting agents as part of an international agreement known as the Montreal Protocol. The regulation lists many HCFCs and CFCs (different types of refrigerants that deplete the ozone layer), but R22 is recognized as one of the worst offenders.
Timeline and R22 phase out progress in 2018
In 2003, the phase out of R22 production and imports launched. By early 2010 the production and import of R22 was reduced. However, servicing current, existing equipment is still acceptable if there is an available supply of R22. To confirm the public’s compliance with the new law, all sales of R22 must be bought by a certified technician. R22 production and import will be continually reduced by law until 2020, when all production and import will be banned. Only recycled R22 refrigerant will be available to service existing air conditioners after 2020.
The graph above shows the EPA’s consumption allowance of R22 by percentage. The limits on R22 consumption were implemented in 2010 and follow a declining trend until 2020.
So how does this affect prices?
If this sounds like a case study on supply and demand, then you are on the right track. As you likely understand, older air conditioners could more frequently experience leaks and need repairs. Any systems that are older than 2010 are more likely to use R22, which means there’s a lot more demand for it, and a very limited supply. Prices have only risen due to scarcity.
Recall that in order to obtain R22, you’ll need to be an EPA-certified technician. So, the average homeowner isn’t able to purchase a cylinder themselves. Also, there are some firm regulations now on how refrigerant must be reclaimed and recycled, which adds to the cost. This cost is passed on to the homeowner as companies must cover the increased overhead associated with R22 repairs. There are requirements for importing, labeling, record keeping, reporting, destruction and reclaiming of R22 from existing systems.
So, what does this mean for you?
The cost of R22 is dramatically increasing because of the diminishing supply, and new refrigerant will no longer be available for use at all after 2020, except from recycled quantities.
If you’re thinking, “Wow, this is starting to sound expensive,” you’re spot-on, it is. This is why when our technicians come out to inspect your unit we check to see what refrigerant your unit uses, and lots of cases, we’ll advocate for an upgrade because of the increasing cost of maintaining an R22 air conditioner.
How do I know if my unit uses R22?
If you have an air conditioning system that was built before 2010, your AC will probably have R22. However, if you installed your air conditioner after January 1, 2010, then your unit may not have R22. You can find the type of refrigerant your system runs on by reading the appliance’s nameplate. This nameplate is normally found on the outdoor condenser of your central air conditioning system. If you don’t find it, you can check your user’s manual. Otherwise, you can call your local Service Experts center. If you have a maintenance agreement with us, we also have your information on hand and a tech can let you know right away if your unit uses R22.
Instead of Freon, use Puron
The industry has made the switch from R22 to R410a, which you may know by the brand name Puron. Throughout this article, we’ll use the name R410a (although Puron is a familiar brand, there are other companies that make R410a). There are some valuable benefits to switching from an R22 air conditioning unit to one that uses R410a. It has a higher safety rating and an ozone depletion rating of zero, and it performed slightly better on energy-efficiency tests than R22.
You may have heard information about “drop-in” replacements for R22. We strongly recommend against this option. Normally a homeowner who is concerned about the cost of replacing their air conditioner seeks out an alternative, and this sounds like an easy solution. It usually costs the homeowner more money, and nearly always voids the manufacturer warranty. The reality about “drop-ins” is that there is no “drop-in” solution where you just swap out the refrigerant. The phrase “drop-in” is referring to retrofitting a unit, which when done right can cost the homeowner as much, or more, money than purchasing a new unit that uses R410a. In part, this is because different refrigerants work at different pressure levels and require different parts to run, which means the technician is forced to replace the most expensive components of your system to work with the new refrigerant. If this crucial step is avoided, your system will quickly stop running, and you’ll be forced to install a new unit anyway.
Your manufacturer will possibly not pay for the parts to make this transition because retrofitting your AC system will likely void the warranty. It’s typically just a temporary fix, but shopping for a new upgraded AC system will probably benefit most homeowners in dependability, satisfaction, and long-term comfort.
It’s wise to discuss pricing offers with your HVAC provider if you’re worried about cost. At Service Experts Heating & Air Conditioning, we have financing available that makes a replacement doable, and we keep track of any manufacturer and utility rebates that would make it easier to handle an unforeseen replacement. To avoid an emergency on a hot day, a lot of of our customers elect to do a pre-emptive replacement, and replace an old unit before it doesn’t work. If you’re considering that route as well, then you’re in good company!
If your unit was built after 2010, you’re probably safe
If your heating and air conditioning system was built after January 2010, the R22 phase out dilemma may not apply to you, because it’s probably that your system uses the new, approved replacement refrigerant, R410a. However, air conditioners installed after 2010 could potentially use R22, so it’s ideal to check with an HVAC Expert. You can always check for this and the refrigerant type by reviewing the nameplate on your condenser (the condenser is the outside unit).
What do I do if my air conditioner uses R22?
To recap, if your HVAC equipment was produced prior to January 2010, specifically if it’s older than a decade, you have a few options:
- Buy an upgraded, more environmentally-friendly system that uses R410a.
- Contact an expert to replace the parts in your current air conditioner to help make it compatible with an approved air conditioner refrigerant. This is not advised.
- Keep using recycled R22 and burn through costs like it’s the ozone layer.
To be clear, the EPA regulates the production and use of this refrigerant, but not your system. The law doesn’t require you to replace your air conditioner. Eventually, your AC will quit running and it will need to be replaced, and only R410a units will be available to buy.
The ideal option is to purchase a new, upgraded air conditioner, especially if your current air conditioner is already more than 10 years old. Service Experts Heating & Air Conditioning has several financing options that help make the purchase affordable, and again, we look out for rebates from HVAC manufacturers and local utilities to make it easier on you. New AC equipment can be more efficient and present you superior comfort, helping to reduce your energy costs.
We do have one more option available in select locations. To provide our customers with high-quality equipment and service at competitive rates, we started the Advantage Program, which is a worry-free program that provides HVAC equipment with a full coverage repair and maintenance plan for a low monthly price.
You could also pick the status quo and continue using recycled R22 air conditioning refrigerant for the foreseeable future. While this sounds like a nice alternative, the price of servicing old R22 A/C systems is starting to surpass several hundred dollars (easily a down payment on a new system). You may also see the prices climb as demand continues to rise on a substance that is no longer produced or widely available.
If you aren’t aware of what type of AC refrigerant your air conditioning system uses, let us help. Call Service Experts Heating & Air Conditioning today and we can provide an inspection to determine if you are currently using R22 and, if so, what’s the best next step.
The good news
While making the transition to an approved AC refrigerant may be frustrating, it’s helping to save the ozone layer. These regulations will help guard the ozone layer in the Earth’s atmosphere, which helps block radiation from the sun and prevents serious illnesses, such as skin cancer. It’s not far-fetched to say that you, as a homeowner, are a large part of this by replacing an old R22 unit with a newer, ozone friendly unit.
If you have any questions, please reach us for a free, in-home consultation by filling out the form below.
*Freon is a registered trademark of the DuPont Corporation